© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
State: 27.05.2020 p. 3
Mounting instructions for seesaw „sali 4“
Item No. 51 2515 402
6. Clean the foundation surface and place the play equipment on it. Screw the
play equipment onto the foundation using the included heavy-duty dowels.
7. Cover the entire impact area with fall protection according to the required
drop height in accordance with EN 1176-1.
Critical drop height: 1450 mm
Recommended surface material: sand, wood chip, gravel, synth. impact
protection.
With a smaller installation depth (special edition) we recommend synthetic fall
protection. In this case, make sure that protruding parts (e.g. screws, gusset
plates) are covered with appropriate fall protection.
8. Please install at the point of impact suitable impact-absorbing elements.
A suitable impact-absorbing element must achieve the following require-
ments: the movement must be stopped gradually, so that there is no sudden
stop or a sudden inversion of the movement.
9. Do not allow children to use the equipment before the installation has been
finished.
Seesaw softeners must be ordered seperatly. We recommend the seesaw
softener n° 451611131 available at stilum.
Stilum seesaw softener n° 45161013x is only to be installed on a solid under-
ground.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
Diagram 3: Top view
2500
1020
5600
1035
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
sali 4
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Änderung
Datum
1:20
A3
Gewicht
Name
Name
Draufsicht
0410-00-00
Maßstab
Schramm
17.03.17
A Fallraum geändert
04.12.18 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Area of the
minimum space
