background image

©  stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid  •  Tel. +49 (0) 2689 92790-0  •  All rights and product modifications reserved

Mounting instructions mushroom roof „letus“

Item-No. 51 5518 401

State: 08.10.2020 p. 3

 

7.  Cover the entire minimum space with fall protection according to the required 

drop height in accordance with EN 1176-1.    

 

 

 

 

Critical drop height: --

 

Recommended surface material: optional 
With a smaller installation depth (special edition) we recommend synthetic 
impact protection. In this case, make sure that protruding parts (e.g. screws, 
gusset plates) are covered with appropriate fall protection. 

8. 

Foundations of one-mast equipment have to be accessible for regularly ins

-

pection.

9. 

Do not allow children to use the equipment before the installation has been 
finished.  

 

 

Attention:

 If the play equipment has been incompletely installed or partly dis

-

mantled when carrying out maintenance and repair work, this may lead to particu-

lar risks of injury for the user. For this reason, make clearly visible that the equip

-

ment shall not be used in such cases. 

NOTE:

 Play equipment, which contain components made of stainless steel should 

not come with „normal“ steel parts in contact. Those steel parts may rub off and 
leave small steel particles in combination with moisture brown rust stains.If such 
corrosion occur on stainless steel parts, they are fine with an abrasive (240 grit) to 

remove.  
Please take care when transporting and setting up the fact that the components 
are made of stainless steel with no „normal“ steel parts in contact.

Diagram 3: Top view 

Area of the 

minimum space

4200

1517

OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE 

TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER 

ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER- 

WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

Oberflächen nach

DIN ISO 1302

Reihe 2

Zul. Abweichung

DIN 2768 - mH

1

 

Letus

Benennung

Gepr.

Werkstoff

Blatt

Datum

Projekt

Gez.

Zuschnitt

Zeichnungsnummer

Rev

Änderung

Datum

1:30

A3

Gewicht

Name

Name

Draufsicht

1211-00-00

Maßstab

Mattheis

31.01.17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gewerbegebiet Larsheck

56271 Kleinmaischeid

Deutschland

Отзывы: