background image

©  stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid  •  Tel. +49 (0) 2689 92790-0  •  All rights and product modifications reserved

Mounting instructions for bouncing bridge „arcus“  

Item-No. 51 4512 401

State: 18.01.2021 p. 3

 

8.  Cover the entire impact area with fall protection according to the required 

drop height in accordance with EN 1176-1. 

 

Critical drop height: 400 mm

 

Recommended surface material: optional 
With a smaller installation depth (special edition) we recommend synthetic 
impact protection. In this case, make sure that protruding parts (e.g. screws, 
gusset plates) are covered with appropriate fall protection.   

9. 

Do not allow to use the equipment before the installation has been finished.

 

 
 
 
 
 

STAINLESS STEEL  

 

Attention:

 If the equipment has been incompletely installed or partly dis

-

mantled when carrying out maintenance and repair work, this may lead to 

particular risks of injury for the user. For this reason, make clearly visible that 
the equipment shall not be used in such cases. 

 

 

NOTE:

 Play equipment, which contain components made of stainless steel 

should not come with „normal“ steel parts in contact. Those steel parts may 
rub off and leave small steel particles in combination with moisture brown rust 
stains.If such corrosion occur on stainless steel parts, they are fine with an 
abrasive (240 grit) to remove. 

 

Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.  
 

Diagram 3: Top view

1510

6800

3700

1500

OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE 

TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER 

ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER- 

WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

Oberflächen nach

DIN ISO 1302

Reihe 2

Zul. Abweichung

DIN 2768 - mH

1

 

arcus

Benennung

Gepr.

Werkstoff

Blatt

Datum

Projekt

Gez.

Zuschnitt

Zeichnungsnummer

Rev

Änderung

Datum

1:25

A3

Gewicht

Name

Name

Draufsicht

2129-00-00

Maßstab

Schramm

01.08.18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gewerbegebiet Larsheck

56271 Kleinmaischeid

Deutschland

Area of the  

minimum space

Содержание arcus

Страница 1: ...rsheck D 56271 Kleinmaischeid Tel 49 0 2689 92790 0 All rights and product modifications reserved Mounting instructions for bouncing bridge arcus Item No 51 4512 401 State 18 01 2021 p 1 Diagram 1 Overall view of the play equipment ...

Страница 2: ... bridge with the included shackles to the pipes above and to the side of both tubular frames To guarantee a permanent connection we recommend gluing in the shackle bolts 7 Align the equipment and screw the base plates of the equipment to the foun dation using the included heavy duty dowels Reinforcement plan Concrete foundation with reinforcement Foundation BSt 500S Stirrups Ø 8 mm lengthwise and ...

Страница 3: ...nt shall not be used in such cases NOTE Play equipment which contain components made of stainless steel should not come with normal steel parts in contact Those steel parts may rub off and leave small steel particles in combination with moisture brown rust stains If such corrosion occur on stainless steel parts they are fine with an abrasive 240 grit to remove Please take care when transporting an...

Страница 4: ...uipment with wooden elements it cannot be ruled out that dry cracks may develop These natural changes of wood are dependent on clima te conditions as well as on the age and usage of the play equipment Longer dry periods may lead to more dry cracks This development however does not represent a quality defect Static properties of the equipment are not impaired See EN 1176 Bbl 1 2019 01 4 2 7 6 Dry c...

Отзывы: