STILLA Windsor S3008, Руководство по сборке

Страница: 21 / 28

20 | P a g e
STEP 3.9
DOOR HANDLE ASSEMBLY
3.9 - ASSEMBLY PARTS – DOOR HANDLE ASSEMBLY
PART CODE QTY DESCRIPTION
TH 1 T Handle
3.9 - ASSEMBLY – DOOR HANDLE ASSEMBLY
Remove bolts and leaver from back of T Handle (TH). Mark and drill 12mm centre hole in
position shown, 50mm in from door edge.
Insert T handle in position and mark two outside holes. Remove T handle and drill 2 x 6mm
holes.
Insert T handle back in with bolts, and fasten nuts on back of door.
STEP 4.0
DOOR HANDLE ASSEMBLY
4.0 - ASSEMBLY PARTS – DOOR HANDLE ASSEMBLY
PART CODE QTY DESCRIPTION
1 T Handle Leaver
4.0 - ASSEMBLY – DOOR HANDLE ASSEMBLY
Holding door in closed position, flush with VJ cladding on front - slide leaver onto T Handle
and tighten once hitting on wall stud beside door.