STILLA S3005, Руководство по сборке

Страница: 2 / 44

1 | P a g e
Caution
Please be careful when handling all components, some parts have sharp metal edges.
Always wear work gloves, eye protection and long sleeves when assembling or maintaining
your shed.
Tools required for assembly
•
Level
•
Drill (capable of driving 100mm
Batten Screw)
•
Hammer
•
Ladder
•
12mm Drill bit
•
6mm Drill bit
•
Tape measure
•
Phillips head drive
•
Hex Head Drive (5/16’)
•
Safety glasses
•
Gloves
•
Circular/power saw (if rebated or
heavy duty floor was chosen)
•
4mm Alan key
•
Batten screw drive
Before assembly
•
Before proceeding with installation, we recommend viewing the Cedar Shed video at
www.stilla.com.au/installation/ or search Stilla Classic Cedar Sheds on Youtube. This doesn’t
show the installation in detail however it could give you some handy tips. Please note we
haven’t videoed the assembly of each shed however the video online is the Maple 12x6 and
will give you an overall idea on how the installation process is completed.
•
Remove all parts from packages and place in a safe place close to assembly area.
•
Review all instructions; continue to refer to instructions throughout assembly – step
by step.
Preparing your site
•
If you are installing your shed on the Stilla rebated floor we recommend finding a
place in your yard that is very close to level. Pavers or a solid material that will not be
affected by weather can be used to perfectly level the shed by placing under the
floor frame where required, make sure all members are supported.
•
If you are installing your shed on the Stilla heavy duty floor, this can be placed on
unlevelled surfaces and levelled up by using the 100x100 stumps provided.