STILLA Hyland S3015, Руководство по сборке

Страница: 17 / 52

16 | P a g e
STEP 2.8
BACK END GABLE ASSEMBLY
2.8 - ASSEMBLY PARTS – BACK END GABLE ASSEMBLY
PART CODE QTY DESCRIPTION
G 2 8ft Gable (left and right)
BGS 1 490mm Back Gable Cover Strip
65HHS 2 65mm Hex head screw
40N 5 40mm Nail
2.8 - ASSEMBLY – BACK END GABLE ASSEMBLY
Lay left and right gables (G) on a flat surface with the frame facing upwards, as seen below.
Hold flush at the bottom and screw together in position shown below using 2x 65HHS.
Turn fastened gable over with the cedar now facing upwards. Position BGS over join in gable,
holding bottom flush with bottom of cedar cladding and nail using 5x 40N.
Lay Gables on flat surface
Hold flush at the bottom and
fasten together with 2x 65HHS
Nail BGS on cedar side,
flush with bottom, to
cover join