Still RX70-16, Оригинальное руководство пользователя

Страница: 215 / 380

Operation
4
Attachments
F1 F1
F2 F2
7325_003-044
1
3
2
Controlling attachments with the
fingertip and 5th function
NOTE
For technical reasons, clamping attachments
cannot be controlled via the 5th function.
NOTE
The designation "5th function" refers to the
fact that the four operating levers control
four functions, while the "5th function" can
be controlled by switching functions.
The attachments (variant) are controlled using
the operating levers (1).
You can also use the switch (2) to switch
functions, in which case the corresponding
operating lever controls the "5th function".
The upper and lower parts of the pictogram (3)
behind the operating lever show the function
that is activated with this lever.
This essentially involves the following:
– Move the operating lever forwards
The attachment moves in the direction of
movement shown in the upper part of the
pictogram.
– Move the operating lever backwards
The attachment moves in the direction of
movement shown in the lower part of the
pictogram.
– Actuate the switch (2)
The additional function of the attachment is
activated/deactivated and can be controlled
as the "5th function" using the operating lever.
174749 EN - 03/2017 203