Still RCG25 Скачать руководство пользователя

Страница: 28 / 182

DANGER

LPG is highly flammable due to its volatility. Fur-

thermore, since it has a specific weight higher than

that of air (approximately twice the value), if the gas

leaks it remains suspended near the ground, thus

increasing the resulting hazard. It is prohibited to

park or leave the truck in closed and/or under-

ground environments.

General safety rules for liquid gas

The term "liquid gas" refers to BUTANE or

PROPANE or mixtures of BUTANE/

PROPANE supplied in bottles or particular

tanks and used for the propulsion of internal-

combustion engines.
The LPG quality must comply with the require-

ments of DIN 51622 as a minimum. The quali-

ty is optimum when the LPG complies with the

requirements of EN 589 (automotive gas).

DANGER

Risk of explosion! LPG is heavier than air; it diffu-

ses on the ground and spreads over large areas.

–

Trucks with LPG systems must only be parked in

sufficiently well-ventilated areas above ground

level.

–

They must not be parked near entrances to rooms

below ground level.

–

Sufficient space must be left around trucks that

have been parked; such areas must not include

cellar openings or cellar access points, pits or

similar cavities, drains without liquid seals, ventila-

tion shafts and light wells or combustible material.

DANGER

Risk of fire! Whenever LPG escapes, it immediately

becomes gaseous and therefore produces a poten-

tially explosive atmosphere. The vapours are heavi-

er than air and diffuse on the ground. Vapours

spread over large areas and can cause fires and

reignition.
LPG trucks and LPG cylinders must only be operated

and parked or stored in well-ventilated areas.

DANGER

Risk of explosion!

–

Do not smoke during maintenance work on LPG

systems, and make sure that there are no open

flames, stoves, lanterns or similar items located in

the vicinity.

–

Use only anti-static-treated tools that do not pro-

duce sparks.

–

Anti-static clothing and footwear are recommen-

ded.

Condition of the LPG cylinders

DANGER

LPG cylinders must not protrude beyond the edges

of the truck body because collisions with objects or

other trucks could cause them to be damaged.

There is a risk of explosion!

–

Only use LPG cylinders that have been approved

for operation of the LPG system.

Duties of the employer and the worker

The employer or the manager of the plant

where the liquid gas-powered industrial trucks

are used must ensure that these trucks are

used and maintained by suitably trained per-

sonnel only. The liquid gas-powered truck can

be put into service only after having checked

that it is in good condition.
The employer must provide company instruc-

tions for the industrial trucks used, written in a

simple and understandable format and con-

taining all the information necessary for safe

use of these trucks within the company activi-

ties. All the operators and maintenance per-

sonnel must be familiar with these instruc-

tions, and the instructions must always be

available and strictly followed in the work-

place.

Safety

General safety rules for liquid gas

60108011601 EN - 04/2020

Содержание RCG25























































































































































































Результаты поиска

Содержание RCG25

Отзывы:

Похожие инструкции для RCG25

Бренды по названию

Популярные бренды

Still RCG25, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG25

Отзывы:

Похожие инструкции для RCG25

Бренды по названию

Популярные бренды