Still LTX-T04 Скачать руководство пользователя страница 60

Страница: 60 / 114

Use

Driving on a slope

NOTE

We recommend that you do not use the vehicle

on a slope greater than 5% (with load) or 10%

(without load) in order to avoid damaging the

motor, brake and/or battery.

Exercise extreme caution when using the

vehicle on a slope:
– Do not drive on slopes that exceed the

vehicle’s maximum allowable gradient.(See

Technical Datasheet)

– Make sure that the ﬂoor is clean, ﬂat,

non-slip and uncluttered.

Ascending a slope

Always travel in forward gear when ascending

slopes with a load.Unladen vehicles can

ascend slopes in forward or reverse gear.

Descending a slope

Always travel in forward gear when descen-

ding slopes with a load.Unladen vehicles must

descend slopes in forward gear(i.e. with the

tow coupling facing uphill.)

DANGER

Risk of death, injury and/or serious damage to the

equipment.
– Slow down and brake very gradually when

travelling downhill.

– Never park the vehicle on a slope.Never make

a U-turn or take shortcuts on a slope.The driver

must always drive more slowly when working on

a slope.

1193 801 16 01 EN - 06/2016

Содержание LTX-T04



















































































































Результаты поиска

Содержание LTX-T04

Отзывы:

Still LTX-T04, Оригинальное руководство пользователя, Страница: 60 / 114

Результаты поиска

Содержание LTX-T04

Отзывы: