Still LTX-T04 Скачать руководство пользователя страница 24

Страница: 24 / 114

Safety

Basic principles for safe operation

Insurance cover on company

premises

In many cases, company premises are

restricted public trafﬁc areas.

NOTE

The business liability insurance should be

reviewed to ensure that, in the event of any

damage caused in restricted public trafﬁc

areas, there is insurance cover for the truck in

respect of third parties.

Warning regarding non-original parts

Original parts, attachments and accessories

are specially designed for this truck. We

speciﬁcally draw your attention to the fact that

parts, attachments and accessories supplied

by other companies have not been tested and

approved by STILL.

CAUTION

Installation and/or use of such products may there-

fore have a negative impact on the design features

of the truck and thus impair active and/or passive

driving safety.
We recommend that you obtain approval from the

manufacturer and, if necessary, from the relevant

regulatory authorities before installing such parts.

The manufacturer accepts no liability for any da-

mage caused by the use of non-original parts and

accessories without approval.

Modiﬁcations and reﬁtting

If your truck is to be used in speciﬁc condi-

tions (refrigerated warehouse or ﬂameproof

protection), it must be specially equipped and

approved for this purpose, if applicable.
If your truck is used for work that is not spec-

iﬁed in the guidelines or in this manual and it

must be modiﬁed or reﬁtted for this purpose,

please remember that any structural modiﬁ-

cation may affect truck handling while driving

and its stability, and may lead to accidents.

1193 801 16 01 EN - 06/2016

Содержание LTX-T04



















































































































Результаты поиска

Содержание LTX-T04

Отзывы:

Still LTX-T04, Оригинальное руководство пользователя, Страница: 24 / 114

Результаты поиска

Содержание LTX-T04

Отзывы: