Still HPT 10 XE Скачать руководство пользователя страница 26

Страница: 26 / 100

Safety

Deﬁnition of terms used for responsible persons

Operating company

The operating company is the natural or legal

person or group who uses the industrial truck

or on whose authority the truck is used.
The operating company must ensure that the

industrial truck is used only for its proper pur-

poses and in compliance with the safety reg-

ulations in these operating and maintenance

instructions.
The operating company must ensure that

all users read and understand the safety

information.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
We recommend that the national performance

speciﬁcations are adhered to.

Qualiﬁed person

A qualiﬁed person is a ﬁtter who works for

the manufacturer or is a person who meets

following requirements:
• A completed vocational qualiﬁcation that

demonstrably proves their professional

expertise. This proof is to consist of a voca-

tional qualiﬁcation or a similar document.

• Professional experience indicating that

the qualiﬁed person has gained practical

experience of industrial trucks over a

proven period during their career. During

this time, this person has become familiar

with a wide range of symptoms that require

checks to be carried out, such as based

on the results of a hazard assessment or a

daily inspection.

• Recent professional involvement in the ﬁeld

of the industrial truck test in question and

an appropriate further qualiﬁcation are es-

sential. The qualiﬁed person must have ex-

perience of carrying out the test in question

or of carrying out similar tests. Moreover,

such a person must also be aware of the lat-

est technological developments regarding

50988046052 EN - 10/2018

Содержание HPT 10 XE





































































































Результаты поиска

Содержание HPT 10 XE

Отзывы:

Похожие инструкции для HPT 10 XE

Бренды по названию

Популярные бренды

Still HPT 10 XE, Оригинальное руководство пользователя

Результаты поиска

Содержание HPT 10 XE

Отзывы:

Похожие инструкции для HPT 10 XE

Бренды по названию

Популярные бренды