Still EXD 20 Скачать руководство пользователя страница 77

Страница: 77 / 146

Raising/lowering the mast

Lifting the mast:

–

Press button (2).

The forks are raised.
Lowering the mast:

–

Press button (1).

The forks are lowered.
When the lifting control (1) is released, the

forks stabilise at the required height.

NOTE

A groove (3) is present on each side of the

button. This helps you to feel the button and to

identify it even if there is not much light.

Initial Lift

Lifting the load arms:

–

Press the button (4).

The load arms are raised.
Lowering the load arms:

–

Press the button (5).

The load arms are lowered.

CAUTION

Risk of the load swinging and loss of stability
Do not drive with a load in the raised position with-

out load on the load arms. The high load must be

lowered as close as possible to the load in the low

position. The operator must lower the forks again be-

fore moving the truck.



Use

Transporting loads

11638011551 EN - 02/2021 - 06

Содержание EXD 20



















































































































































Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды

Still EXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды