Still ECH 12 Скачать руководство пользователя страница 74

Страница: 74 / 110

Load handling

Safety guidelines for handling loads

WARNING

Closely observe the following instructions before

picking up loads.Never touch or stand on moving

parts of the truck (e.g. lifting devices, equipment for

picking up loads).

WARNING

Risk of crushing hands and feet when using the lift.
When using the lift, keep hands and feet away from

moving parts.

DANGER

It is not permitted to walk under the forks. It is not

permitted to transport or lift people on the forks.
If there are people under or on top of the forks, do

not move the truck. Do not move the forks and do not

drive the truck.

DANGER

Risk of accident when forks are changed:
If the forks are changed and a different type of forks

to the original forks is fitted, the residual load capaci-

ty changes.
When forks are changed, a new residual capacity

plate must be affixed.
If a truck is supplied without forks, the residual ca-

pacity plate for standard forks is affixed.(See chapter

"Technical Datasheet”)

DANGER

Wear protective footwear. Always keep a suitable

distance between your feet and the truck.
Risk of crushing feet when manoeuvring the truck.

CAUTION

The transport of persons or passengers is strictly

prohibited.

CAUTION

Be especially careful not to collide with adjacent

loads.
The load must be properly positioned to prevent colli-

sions in narrow aisle spaces.

Operation

Load handling

5001 801 1505 EN - 12/2019

Содержание ECH 12















































































































Результаты поиска

Содержание ECH 12

Отзывы:

Похожие инструкции для ECH 12

Бренды по названию

Популярные бренды

Still ECH 12, Оригинальное руководство пользователя

Результаты поиска

Содержание ECH 12

Отзывы:

Похожие инструкции для ECH 12

Бренды по названию

Популярные бренды