Still CX-T-40 Скачать руководство пользователя страница 81

Страница: 81 / 146

Operation

Handling trailers

Coupling trailers

CAUTION

When coupling and uncoupling trailers, the tractor

and trailer must always be on level ground. Make

sure that all controls are in the neutral position and

the parking brake is applied.

Before coupling a trailer, check if the draw

bar of the trailer and the tow coupling of the

tractor match. Make sure that the brakes of the

trailer - if present - are applied or the wheels

securely blocked to prevent any unintentional

movement. Reverse the tractor to the trailer

so that the tow pin and the trailer draw bar are

aligned as seen from the driver’s position.

123

456

789

PRG

1047_003-039

– Step off the presence area (1). The tractor

will be braked.

Depending on the type of trailer coupling,

proceed as follows:
• Single-position or multi-position trailer

coupling, see ⇒ Chapter "Single-position

or multi-position trailer coupling", P. 5-74

• Automatically closing trailer coupling, see

⇒ Chapter "Automatically closing trailer

coupling", P. 5-76

• ROCKINGER trailer coupling, see ⇒ Chap-

ter "ROCKINGER trailer coupling", P. 5-78

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды