Still CX-T-40 Скачать руководство пользователя страница 84

Страница: 84 / 146

Operation

Handling trailers

Automatically closing trailer coupling

1050_003-034

Hitching up

– Pull the safety lever (3).
– Swivel the lever (2) up.
– Release the brake on the front axle of the

articulated drawbar trailer.

CAUTION

If this is not done, the coupling jaw, drawbar eye

and support can be damaged!
The drawbar eye must hit the centre of the coupling

jaw when hitching up a rigid drawbar trailer.

– Reverse the tractor slowly.

DANGER

Do not allow anyone to stand between the tractor

and trailer during the coupling procedure.
Only drive the tractor to the trailer.

DANGER

Risk of accident!
– Make sure that after each coupling procedure

the safety (3) fully contacts the securing sleeve.

A projecting safety (3) indicates improper hitching.
The trailer may not be driven in this state.
If the locking system is blocked, do not intervene.

Risk of crushing your ﬁngers! Please contact your

after-sales service.

– Remove the chocks at the trailer.

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды