Still CX-T-40 Скачать руководство пользователя страница 82

Страница: 82 / 146

Operation

Handling trailers

Single-position or multi-position

trailer coupling

Trailer coupling

1050_003-019

– Pull the tow pin (2) out.
– Reverse the tractor slowly.

DANGER

Do not allow anyone to stand between the tractor

and trailer during the approach. Always drive the

trailer to the tractor.

– Introduce the hitch of the drawbar into the

coupling jaw (3) on the tractor.

NOTE

The multi-position coupling provides 3 hitch

heights. It is recommended to choose the

height at which the drawbar is horizontal:

Coupling height (distance from the ground)

Position

Height (mm)

300

355

410

1050_003-020

– Lower the tow pin (2) into the trailer coupling

(3) and rotate it 90°. The tow pin is now

secured.

CAUTION

Always make sure that the tow pin is secured after

the coupling procedure.

– Remove the chocks from the wheels of the

trailer and release the trailer brakes.

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды