Stilevs UTUMAX UT-168, Инструкция по эксплуатации

Страница: 16 / 20

16
Iron does not steam
The water tank many be empty. Turn the steam
valve to off position and add water .Allow the
iron to heat, and then set the steam dial to
the steam setting.
Burst of steam
feature does not
work
The water tank must be at least 1/4 full
.Temperature must be set to steam position.
Iron should be in the horizontal position.
Prime pump briefly. Allow a short pause
between shots. Be sure to fully depress the
burst of steam button.
Spry mist feature
does not work
The water tank must be at least 1/4 full. Fill
the iron as described in the section “how to
fill the water tank”.
Iron is leaking
The variable steam dial must be set on” “,until
the iron is hot . The temperature setting is too
low to produce steam. Shot of steam used too
much, allow iron to re-heat.