Stilevs Utumax UT-088, Инструкция по эксплуатации

Страница: 16 / 20

16
Burst of steam feature
does not work
The water tank must be at least 1/4 full
.Temperature must be set to steam position. Iron
should be in the horizontal position. Prime pump
briefly. Allow a short pause between shots. Be
sure to fully depress the burst of steam button.
Spry mist feature
does not work
The water tank must be at least 1/4 full. Fill the
iron as described in the section “how to fill the
water tank”.
Iron is leaking
The variable steam dial must be set on” “,until the
iron is hot . The temperature setting is too low
to produce steam. Shot of steam used too much,
allow iron to re-heat.