Stilevs tartar BA-735, Инструкция по эксплуатации

Страница: 14 / 20

Weighing Function
• Place the scale on a hard,flat surface(avoid carpets).An uneven floor contributes to
inaccurate Measurements.
• Stand on the scales with both feet.the device switches on automatically.
• Distribute your weight equally and wait for the scale to determine your weight.
• The digits on the display will flash before your exact weight will be shown.
• In order to extend the battery life,the device will automatically turn off 10 seconds
after you have stepped off the scale.
Saving Personal Date
NOTE:
• The scale has default values that you can change,as described below.
• Carry out the following steps in sequence and within a few seconds.Otherwise,the
device will
automatically cancel input mode.
• Press the button SET. The memory space will flash on the display(USER0.Confirm
the setting
by pressing SET or select another memory space by pressing the UP/DOWN button.
then press SET to go to the next setting.
• The symbol for”male” or “female” will flash.confirm the setting by pressing SET or
use the UP/DOWN button to choose the symbol for your gender.then press to go
the next setting.
• The height setting will flash.select your height by pressing UP or DOWN button.
holding down one of the buttons will accelerate the process.confirm your entry by
pressing SET.
• The setting AGE will flash.select your age by pressing UP or DOWN button.holding
down one of the buttons will accelerate the process.confirm your entry by press-
ing SET.
NOTE:
• The device can only function correctly if you stand on the device with bare,dry feet!
• If necessary wipe the contact surface improve results.
• Due to the significant fluctuation of body fat,it is different to attain a standard val-
ue.on average. The optimal testing time is between 6 p.m. And 8 p.m,since the body
fat remains very Consistent during this period of time.
• Press the SET button.the preset stored position date appears on the display9USER
flash). Use the UP/DOWN button to select the stored position at which your date
is saved.
• Wait for the USER display and 0.0kg(0.0lb/st)to stop flashing.
• Stand on the contact surfaces(1) of the scales with both feet.
• Firstly your weight will flash on the display.
• After a few seconds,the following results will be shown:
1. -the body fat content in%(FAT symbol)
-the body water content in %(TBW symbol)
-the results analysis in the form of a bar
2. -the muscle mass content in %(MUS symbol)
-the bone mass content in %(BON symbol)
-the calorie requirement per day
3. -The present gender