Stilevs ST-WAC0310KG1501EU(A3), Руководство пользователя

Страница: 38 / 56

-38-
Unpacking the washing machine
• Warning! Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• Warning! There is a risk of suffocation ! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.Make sure
the small triangle foam is removed with the bottom one together. If
not, lay the unit down with side surface, then remove the small foam
from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
• Warning! You must remove the transport bolts from the backside before using the
product.
• Warning! You will need the transport bolts again if you move the product , so make sure
you keep them in a safe place.
Please take the following steps to remove the bolts:
• Warning! The lock nuts on all four feet must be screwed tightly
against the housing.
1. Loosen 4 bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
Levelling the washing machine
1. Check if the legs are closely attached to the cabinet. If not,
please turn them to their original positions tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the floor.
3. Adjust the legs and lock them with a spanner, make sure the machine is steady.
Connect Water Supply Hose
• Warning! To prevent leakage or water damage, follow the instructions in this chapter!
• Warning! Do not kink, crush, modify or sever water inlet hose.
• Warning! For the model equips hot valve,connect it to hot water tap with hot water
supply hose. Energy consumption will decrease automatically for some program.