spilling), press the kettle switch up. A light should come on to indicate
the kettle is ON.
• When the kettle has completed boiling the water the kettle switch will
return to its original position and the light should go out (indicating
the kettle is OFF).
• To stop the kettle early during use, simply push the kettle switch back
into its original position).
Safety Device:
• The kettle is fitted with an ON/OFF switch which automatically switches off
once the water has boiled. Do not hold the ON/OFF switch in the on position.
• If the kettle is switched ON with too little water, or no water, it is
protected against damage by a safety cut-out which will switch off the
power. If the cut-out operates, disconnect the kettle from the mains
supply and leave to cool down before refilling with cold water.
V. MAINTENANCE & CLEANING
Care:
Misuse such as overfilling the kettle, allowing excessive scale build-up,
and boiling with water below the MIN mark will reduce the life of the
element and product.
Cleaning:
• Turn off and unplug the kettle and power base.
• To clean make sure the kettle is empty and, before continuing, ensure
the kettle has completely cooled.
• Using a soft, damp cloth and detergent (if necessary) wipe down the
kettle.
• Make sure all connectors, sockets and switches are kept dry.
• DO NOT IMMERSE ANY PART OF THE PRODUCT IN WATER OR ANY OTHER
LIQUID.
• Do not use harsh or abrasive cleaners as these can damage the product
surfaces.
Scale&De-Scaling:
• To minimize scale build-up, empty the kettle after every use and do not
leave unused water in the kettle over long periods of time.
• Regularly de-scale the kettle using a proprietary brand of de-scaler.
Follow the de-scaler instructions thoroughly.
• After de-scaling, clean the kettle and boil with MAX capacity (empty
the boiled water and rinse with cold water).