13
Top:
Range of rotation of tube
Center: Range of adjustment of control handle
Bottom: Pulling ends of straps downward (left)
Lifting tabs of strap adjusters (right)
The pivot-mounted pleated hose allows the blower tube
or spraying attachment to be rotated about 90° to the left
or right (i.e. counterclockwise or clockwise) from the
center position (control handle vertical).
Adjusting the control handle
You can adjust the position of the control handle on the
pleated hose to suit your reach.
Carry out the adjustment as follows:
- Put the unit on your back.
- Release the clamp screw (11).
- Slide the control handle along the pleated hose to the
most comfortable position.
- Retighten the clamp screw (11).
Adjusting the harness straps
The harness straps are attached to the backplate and
have sliding adjusters for adjustment to any required
length.
Pull the ends of the straps downward to tighten the
backplate against your back. Lift the tabs of the two sliding
adjusters to slacken the harness straps.
Adjust the straps so that the backplate is held firmly and
securely against your back.
