19
SE 121, SE 121 E
English
:
Attach suction tube holder approx.
20 cm (
A
) from bottom end of
extension tube
:
Fit a crevice tool (
10
) or floor
tool (
11
) on the extension tube as
required.
The parking brake may be applied on
the swivel wheel to lock the machine in
one position.
The operating voltage specified on the
rating plate must match that of the mains
power supply. The rating plate is located
on the rear of the upper part of the
vacuum unit.
:
Ensure that the vacuum unit is
switched off
:
Plug the power cable into a correctly
installed socket.
Observe the minimum cable cross-
sections when using extension leads.
SE 121
Switch positions
0 =
Vacuum unit OFF
I =
Vacuum unit ON
645BA014 KN
A
645BA004 KN
10
11
Parking the machine
645BA013 KN
Cable length
Cross-section
Up to 20 m
1.5 mm
2
20 m to 50 m
2.5 mm
2
Connect vacuum unit to
power supply, operation
645BA017 KN