Stihl RMA 2 RP, Инструкция по эксплуатации, Страница: 55 / 524

53
DE
FR
NL
IT
ES
PT
NO
SV
FI
DA
SL
HU
SR
HR
EN
0478 131 9939 C - EN
1 9.2 STIHL AP battery
This symbol indicates the
number of cells and the energy
content according to the cell
manufacturer's specifications.
The available energy content is
lower in practice.
1 9.3 REACH
REACH is an EC Directive for the
registration, evaluation, authorisation and
restriction of chemicals.
Information on compliance with the
REACH Directive (EC) No. 1907/2006 is
available from www.stihl.com/reach.
Fault:
Motor not starting
Possible cause:
– Battery charge state too low – 1 LED
flashes green on battery
– Battery too cold/too warm – 1 LED
illuminates red on battery
– Battery fault – 4 LEDs flash red on
battery
– RMA 2 RP: No battery inserted in
battery compartment 1
– Lawn mower too warm – 3 LEDs
illuminate red on battery
– Lawn mower fault – 3 LEDs flash red on
battery
– ON button not pressed
– Safety plug not inserted
– Electrical connection interrupted
between lawn mower and battery
– Motor overloaded because the grass is
too tall or too wet
– Humidity in machine and/or battery
– Mower housing blocked
– Fuse in safety plug defective
Remedy:
– Charge battery ( Ö 8.4)
– Warm up battery or allow it to cool down
– Remove and re-insert battery; consult
specialist dealer if necessary (
#
)
– RMA 2 RP: Insert battery in battery
compartment 1
– Allow lawn mower to cool down
– Clean electric contacts in battery
compartment (
Ö
13.2); consult
specialist dealer if necessary (
#
)
– Press ON button ( Ö 12.2)
– Insert safety plug ( Ö 9.1)
– Insert battery correctly ( Ö 8.2); clean
electric contacts in battery
compartment (
Ö 13.2)
– Do not switch on motor in high grass,
adapt cutting height ( Ö 9.4)
– Remove battery and dry; clean and/or
dry battery compartment ( Ö 8.2)
– Clean mower housing ( Ö 13.2)
– Replace safety plug (
#
)
Fault:
Motor stops during operation
Possible cause:
– lawn mower overheated – 3 LEDs
illuminate red on battery
– Electrical fault
– Safety plug incorrectly inserted
– Machine overloaded due to mowing
grass that is too long or too wet
– Lawn mower fault
Remedy:
– Allow lawn mower to cool down
– Remove and re-insert battery (
Ö 8.2)
– Insert safety plug (
Ö
9.1)
– Adapt cutting height and mowing speed
to mowing conditions ( Ö 9.4)
– Repair lawn mower (
#
)
Fault:
Excessive vibration during operation
Possible cause:
– Blade fastening screw is loose
– Blade is not balanced
Remedy:
– Tighten blade fastening screw ( Ö 13.7)
– Re-sharpen (balance) or replace blade
( Ö 13.8)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
76 dB(A)
Uncertainty K
pA
2 dB(A)
Hand-arm vibrations:
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
90 m/sec
2
Uncertainty K
hw
0,70 m/sec
2
Measurement in accordance with
EN 20643
Battery technology Lithium ion
Voltage 36 V
Capacity in Ah See rating plate
Energy content in
Wh
See rating plate
Weight in kg See rating plate
Permissible tempera-
ture range
-10°C to +50°C
Sound emissions:
20. Troubleshooting
#
If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.