Stihl MS 500i Скачать руководство пользователя

Страница: 9 / 32

4.9

Reactive Forces

4.9.1

Kickback

0000-GXX-2732-A0

Kickback can be caused for the following rea‐

sons:

–

The rotating saw chain in the upper quadrant

of the bar nose makes contact with a hard

object and is suddenly braked.

–

The rotating saw chain is pinched at the bar

nose.

The chain brake cannot prevent kickback.

WARNING

■

0000-GXX-41

19-A0

If kickback occurs, the saw can be thrown up

in the direction of the operator. The operator

can lose control of the saw and be seriously or

fatally injured.

► Hold the saw firmly with both hands.

► Always keep your body out of the plane of

the cutting attachment.

► Use the working techniques described in this

instruction manual.

► Do not cut with the upper quadrant of the bar

nose.

► Always cut with a properly sharpened and

tensioned saw chain.

► Use a reduced kickback saw chain.

► Use a guide bar with a narrow radius nose.

► Always cut with the chain running at full

speed.

4.9.2

Pull-in

0000-GXX-1348-A0

The saw is pulled away from the operator when

the bottom of the bar is used for cutting.

WARNING

■ If the rotating chain makes contact with a hard

object and is suddenly pinched, the saw is

abruptly jerked away from the operator. The

operator can lose control of the saw and be

seriously or fatally injured.

► Hold the saw firmly with both hands.

► Operate the saw as described in this instruc‐

tion manual.

► Keep the guide bar straight in the cut.

► Apply the spiked bumper properly.

► Always cut with the chain running at full

speed.

4.9.3

Pushback

0000-GXX-1349-A0

The saw is pushed back toward the operator

when the top of the bar is used for cutting.

WARNING

■ If the rotating chain makes contact with a hard

object and is suddenly pinched, the saw can

be abruptly pushed back toward the operator.

The operator can lose control of the saw and

be seriously or fatally injured.

► Hold the saw firmly with both hands.

► Operate the saw as described in this instruc‐

tion manual.

► Keep the guide bar straight in the cut.

► Always cut with the chain running at full

speed.

4 Safety Precautions

English

0458-809-0121-B. VA0.A21.

Содержание MS 500i

































Результаты поиска

Содержание MS 500i

Отзывы:

Похожие инструкции для MS 500i

Бренды по названию

Популярные бренды

Stihl MS 500i, Инструкция по эксплуатации

Результаты поиска

Содержание MS 500i

Отзывы:

Похожие инструкции для MS 500i

Бренды по названию

Популярные бренды