Stihl MS 460 R, Инструкция по эксплуатации

Страница: 8 / 16

MS 460 R
English
6
Mounting the wrap-around handlebar
N
Slide the handlebar (1) onto the saw
from behind and position it
N
Screw in screws (2) P6x32.5
N
Screw in and tighten the screws (3)
P6x19 – already present
N
Push the combination wrench into
the holder
Cutting attachment
N
Unscrew nuts (1) and remove chain
sprocket cover (2)
N
Remove the guide bar and saw
chain – see "Mounting the bar and
chain" in the Instruction Manual for
the basic chain saw
Mounting the guard plate
N
Remove screw (1) and nut (2)
N
Remove screw (3)
N
Remove spiked bumper (4) and
chain catcher (5)
N
Remove screw (6)
N
Coat screw (7) from the conversion
kit with Loctite 243 or equivalent
adhesive and screw it in
N
Position guard plate (8) with
screw (1) and nut (2)
N
Coat screw (9) M5x12 from the
conversion kit and screw (3) with
Loctite 243 or equivalent adhesive
N
Screw in screw (9) with washer (10)
– washer is included only with the
guard plate with an oblong hole and
is required only for it
1 1
147BA008 KN
2
10
3
1
9
2
5
8
147BA017 KN