Stihl MS 400 C-M Скачать руководство пользователя страница 27

Страница: 27 / 32

Condition

Cause

Remedy

Chain lubrication sys‐

tem is supplying

insufficient chain oil.

► Increase oil feed rate.

The chain is over-ten‐

sioned.

► Tension chain properly.

Chainsaw is not

being used properly.

► Have correct use explained, then practice.

18.2

Clearing the Combustion

Chamber

► Engage the chain brake.

0000-GXX-7213-A0

► Rotate the shroud fasteners (1) a quarter turn

counterclockwise.

► Remove the shroud (2).

► Pull off the spark plug boot (3).

► Unscrew the spark plug.

► Dry the spark plug.

WARNING

■ Unconfined sparks may occur if the starter grip

is pulled after the spark plug boot has been

removed. Sparks may cause a fire or an

explosion in an easily combustible or explo‐

sive environment. This can result in serious or

fatal injuries and damage to property.

► Move the Master Control lever to posi‐

tion and hold it there before pulling the

starter grip.

► Move the Master Control lever to position

and hold it there.

► Pull the starter grip and guide it back several

times.

The combustion chamber is cleared.

► Insert and tighten down the spark plug.

0000-GXX-7214-A0

► Press the spark plug boot (3) firmly home.

► Place the shroud (2) in position.

► Rotate the shroud fasteners (1) clockwise until

you hear a click.

The shroud fasteners are locked.

19 Specifications

19.1

STIHL MS 400 C-M Chainsaw

–

Displacement: 66.8 cc

–

Engine power to ISO 7293: 4.0 kW (5.4 bhp)

–

Idle speed to ISO 11681: 2,800 ± 50 rpm

–

Approved spark plug: NGK CMR6H from

STIHL

–

Electrode gap: 0.5 mm

–

Dry weight without guide bar and chain 5.8 kg

–

Max. fuel tank capacity: 600 cc (0.6 l)

–

Max. oil tank capacity: 325 cc (0.325 l)

19.2

Chain Sprockets and Chain

Speeds

The following chain sprockets may be used:

7-tooth for 3/8"

–

Maximum chain speed according to

ISO 11681: 28.9 m/s

–

Chain speed at maximum power: 21.7 m/s

19.3

Minimum Groove Depth of

Guide Bars

The minimum groove depth depends on the pitch

of the guide bar.

–

3/8" 6 mm

19 Specifications

English

0458-788-0121-B

Содержание MS 400 C-M

































Результаты поиска

Содержание MS 400 C-M

Отзывы:

Бренды по названию

Популярные бренды

Stihl MS 400 C-M, Инструкция по эксплуатации

Результаты поиска

Содержание MS 400 C-M

Отзывы:

Бренды по названию

Популярные бренды