Stihl MS 400 C-M, Инструкция по эксплуатации

Страница: 15 / 32

► If the engine is at ambient temperature:
3
5
0000-GXX-7203-A0
4
► Depress the throttle trigger lockout (5) and
hold it there.
► Pull the throttle trigger (4) and hold it there.
► Move the Master Control lever (3) to position
and hold it there.
► Release the throttle trigger (4) and lockout
lever (5).
The Master Control lever (3) engages in posi‐
tion .
0000-GXX-2936-A0
► Hold the chainsaw firmly in one of three ways:
–
Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the toe of your right
boot into the rear handle and press down.
–
Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the heel of your right
boot into the rear handle and press down.
–
Hold the saw firmly with your left hand on
the handlebar – your thumb should be under
the handle. Hold the rear handle tightly
between your legs, just above the knees.
0000-GXX-2937-A0
► Pull the starter grip slowly with your right hand
until you feel it engage.
► Pull the starter grip quickly and allow the
starter rope to rewind several times until the
engine runs.
► If the Master Control lever (3) is in position .
Briefly depress the lockout lever (4) and blip
the throttle trigger (5).
The Master Control lever springs to position .
The engine runs at idling speed.
NOTICE
■ Do not accelerate the engine with the chain
brake engaged since this can damage the
chain brake.
► Disengage the chain brake before you start
cutting.
► Disengage the chain brake.
Your saw is ready for operation.
► If the saw chain rotates while the engine is
idling:
► Shut off the engine and engage the chain
brake.
► Do not use the chainsaw and contact your
STIHL servicing dealer for assistance.
The saw has a malfunction.
► If the engine does not start: Move the Master
Control lever (3) to position and try again to
start the engine.
9.2 Stopping the Engine
1
0000-GXX-7204-A0
2
► Release the throttle trigger (2).
The engine runs at idling speed.
► Move the Master Control lever (1) to posi‐
tion .
The engine stops and the Master Control lever
(1) springs back to position .
► If the engine does not stop:
► Move the Master Control lever to posi‐
tion .
The engine stops.
► Do not use the chainsaw and contact your
STIHL servicing dealer for assistance.
The saw has a malfunction.
9 Starting and Stopping the Engine English
0458-788-0121-B 15