![background image](http://html1.mh-extra.com/html/stihl/ms-201-tc-m/ms-201-tc-m_instruction-manual_1378760012.webp)
MS 201 TC-M
English
10
chain saw with incorrect idle adjustment.
At correct idle speed, the cutting tool
should not move.
If you cannot set the correct idle speed,
have your STIHL dealer check your
chain saw and make proper adjustments
and repairs.
Holding and Controlling the Chain Saw
Always hold the chain saw firmly with
both hands when the engine is running.
Place your left hand on the front handle
bar and your right hand on the control
handle and throttle trigger.
Left-handers should follow these
instructions too. Wrap your fingers
tightly around the handles, keeping the
handles cradled between your thumb
and forefinger. With your hands in this
position, you can best oppose and
absorb the push, pull and kickback
forces of your saw without losing control
(see section on reactive forces).
WARNING
WARNING
To reduce the risk of cut injuries, keep
hands and feet away from the cutting
tool. Never touch a moving cutting tool
with your hand or any other part of your
body.
WARNING
Keep proper footing and balance at all
times. Special care must be taken in
slippery conditions (wet ground, snow)
and in difficult, overgrown terrain. Be
extremely cautious when working on
slopes or uneven ground. Watch for
hidden obstacles such as tree stumps,
roots, rocks, holes and ditches to avoid
stumbling. There is increased danger of
slipping on freshly debarked logs. For
better footing, clear away fallen
branches, scrub and cuttings. Use
extreme caution when cutting small-size
branches because slender material may
catch the saw chain and be whipped
toward you or pull you off balance.
WARNING
Take extreme care in wet and freezing
weather (rain, snow, ice). Put off the
work when the weather is windy, stormy
or rainfall is heavy.
WARNING
To reduce the risk of injury from loss of
control, never work on a ladder or any
other insecure support. Never hold the
machine above shoulder height. Do not
overreach.
WARNING
Never work in a tree unless you have
received specific, professional training
for such work, are properly secured
(such as tackle and harness system or a
0012BA019 KN
H
L
To reduce the risk of seri
-
ous or fatal injury to the
operator or bystanders
from loss of control,
never use the chain saw
with one hand. It is more
difficult for you to control
reactive forces and to
prevent the bar and chain
from skating or bouncing
along the limb or log.
Even for those compact
chain saw designed for
use in confined spaces,
one-handed operation
increases the risk that the
operator may lose
control.
0012BA025 KN