Stihl MS 192, Инструкция по эксплуатации

Страница: 27 / 112

MS 192 C
English
25
N
Hold the saw firmly on the ground
with your left hand on the front
handle – your thumb should be
under the handle.
N
Put your right foot into the rear
handle and press down.
Alternative method of starting:
N
Hold the rear handle tightly between
your legs, just above the knees.
N
Hold the front handle firmly with
your left hand – your thumb should
be under the handle.
N
Pull the starter grip slowly and
steadily with your right hand and
push down the front handle at the
same time. Do not pull out the
starter rope all the way – it might
otherwise break.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
When the engine begins to fire.
If the engine is cold:
N
Set the choke lever (4) to
j
and
continue cranking until the engine
runs.
If the engine is warm
N
Continue cranking until the engine
runs.
As soon as the engine runs
N
Blip the throttle trigger (2) the
Master Control lever (3) moves to
the run position
F
and the engine
settles down to idling speed.
NOTICE
As the chain brake is still engaged, the
engine must be returned to idling speed
immediately or the engine housing and
chain brake might otherwise be
damaged.
N
Pull the hand guard back toward the
handlebar. The chain brake is now
disengaged – your saw is ready for
operation.
NOTICE
Always disengage chain brake before
accelerating the engine. High revs with
the chain brake engaged (chain locked)
will quickly damage the powerhead and
chain drive (clutch, chain brake).
N
Always check operation of chain
lubrication before starting work.
At very low outside temperatures
N
Allow engine to warm up at part
throttle.
Shut odd the engine.
N
Move the Master Control lever to 0
or STOP.
151BA012 KN
151BA010 KN
4
STOP
151BA013 KN
2
3
151BA005 KN
STOP
151BA014 KN