MM 55, MM 55 C
English
13
N
Press the fuel pump bulb (9) at least
5 times - even when bulb is filled
with fuel
Starting
N
Fold in wheels, if present
N
Lay the unit on the ground in a
secure position: It must rest on the
flange of the engine and the support
on the frame. The working tool must
not touch the ground or any other
objects – see also
"Starting/stopping the engine" in the
MultTool Instruction Manual
N
Assume a steady stance – as
shown; always stand at the side of
the machine – risk of injury by
rotating working tool!
N
With the left hand, press the
machine firmly against the ground –
hand on loop handle
Do not stand or kneel on the shaft!
N
Grab the starter grip with your right
hand
Version without Easy2Start
N
Pull the starter grip slowly until you
feel it engage and then give it a
brisk, strong pull
Do not pull out the starter rope
completely – risk of breakage!
Version with Easy2Start
N
Pull the starter grip slowly until you
feel it engage and then give it a
slow, even pull
Do not pull out the starter rope
completely – risk of breakage!
Both versions
N
Do not let the starter grip snap back
– guide it slowly back into the
housing so that the starter rope can
rewind properly
N
continue cranking
When the engine has turned over for the
first time
N
at the latest after the fifth time the
starter rope is pulled, move the
choke lever (8) to
e
N
continue cranking
Once the engine is running
N
Blip the throttle trigger so that the
engine settles down to idle speed
g
if the engine is cold
e
If the engine is warm – even if the
engine has already run but is still
cold
469BA005 KN
469BA004 KN
469BA006 KN
8
469BA034 KN
