background image

HT-KM

English

2

In the STIHL KombiSystem a number of 

different KombiEngines and KombiTools 

can be combined to produce a power 

tool. In this instruction manual the 

functional unit formed by the 

KombiEngine and KombiTool is referred 

to as the power tool.
Therefore, the separate instruction 

manuals for the KombiEngine and 

KombiTool should be used together for 

the power tool.
Always read and and make sure you 

understand both instruction manuals 

before using your power tool for the first 

time and keep them in a safe place for 

future reference.

Pictograms

All the pictograms attached to the 

machine are shown and explained in this 

manual.

Symbols in text

WARNING

Warning where there is a risk of an 

accident or personal injury or serious 

damage to property.

NOTICE

Caution where there is a risk of 

damaging the machine or its individual 

components.

Engineering improvements

STIHL's philosophy is to continually 

improve all of its products. For this 

reason we may modify the design, 

engineering and appearance of our 

products periodically.
Therefore, some changes, modifications 

and improvements may not be covered 

in this manual.

The machine should only be provided or 

loaned to people familiar with this model 

and its operation. The KombiEngine and 

KombiTool user manuals should always 

be handed over with the machine.
Use your pole pruner for limbing only 

(removing or pruning branches). Saw 

wood and wooden objects only.
The machine must not be used for any 

other purposes – risk of accidents!
Only use guide bars, saw chains, chain 

sprockets and accessories that are 

explicitly approved for this power tool 

model by STIHL or are technically 

identical. If you have any questions in 

this respect, consult your dealer.
Use only high quality parts and 

accessories. in order to avoid the risk of 

accidents and damage to the machine.

KombiSystem

Guide to Using this Manual

Safety Precautions and 

Working Techniques

Special safety precau

-

tions must be observed 

when working with the 

pole pruner because it 

operates at a very high 

chain speed, has very 

sharp cutters and a long 

reach.
Both user manuals (Kom

-

biEngine and KombiTool) 

must be read through 

attentively before using 

the unit for the first time 

and kept in a safe place 

for future reference. Non-

compliance with the user 

manuals may cause seri

-

ous or even fatal injury.

Содержание KombiTool HT-KM 4182

































Отзывы: