19.6
Noise and Vibration Data
19.6.1
with KombiTool
For version see "Approved KombiTools".
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
Noise and vibration data measurements include
idling and rated maximum speed in the following
ratios.
FCB‑KM, FCS‑KM, FH‑KM, FS‑KM,
RG-KM and HT‑KM
1 to 1
HL‑KM
1 to 4
BF‑KM, BG‑KM, KB‑KM and
KW‑KM
1 to 6
The exact noise and vibration specifications
depend on the KombiTool being used and are
described in the KombiTool’s instruction manual.
19.6.2
Sound pressure level L
p
to
EN ISO 10517, ISO 11201, ISO 22868
KM 111 R:
92 dB(A) ... 99 dB(A)
KM 131:
94 dB(A) ... 100 dB(A)
KM 131 R:
92 dB(A) ... 101 dB(A)
19.6.3
Sound power level L
w
to ISO 3744,
ISO 10517, ISO 22868
KM 111 R:
108 dB(A)
KM 131:
109 dB(A) ... 110 dB(A)
KM 131 R:
109 dB(A) ... 110 dB(A)
19.6.4
Sound power level L
w
to ISO 3744,
ISO 10517, ISO 22868
KM 111 R:
105 dB(A) ... 110 dB(A)
KM 131:
106 dB(A) ... 108 dB(A)
KM 131 R:
106 dB(A) ... 110 dB(A)
19.6.5
Vibration measurement a
hv,eq
to
ISO 8662, ISO 10517, ISO 11789,
ISO 20643, ISO 22867
Left handle
KM 111 R:
2.6 m/s
2
... 7.2 m/s
2
KM 131:
2.3 m/s
2
... 5.0 m/s
2
KM 131 R:
3.4 m/s
2
... 6.1 m/s
2
Right handle
KM 111 R:
2.7 m/s
2
... 6.4 m/s
2
KM 131:
2.4 m/s
2
... 4.2 m/s
2
KM 131 R:
3.3 m/s
2
... 6.5 m/s
2
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2.0 m/s
2
for the vibration level.
19.7
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
19.8
Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the
{
logo and the
STIHL parts symbol
K
(the symbol may appear
alone on small parts).
21 Disposal
Observe all country-specific waste disposal rules
and regulations.
English
20 Maintenance and Repairs
20
0458-436-0121-B
