KA 85 R
English
39
Symbol on slide control
7
h
– stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (
h
) to STOP-0.
Starting
N
Press down the trigger lockout lever
and squeeze the throttle trigger
N
and hold them in that position.
N
Move the slide control to START
and hold it there.
N
Now release the throttle trigger,
slide control and trigger lockout in
that order. This is the starting
throttle position.
N
Set the choke lever (8) to:
N
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is filled with fuel.
Cranking
N
Place the power tool on the ground
so that it rests on the machine
support: Check that the attachment
is not touching the ground or any
other obstacles – see also "Starting
/ Stopping the Engine" in the
instruction manual of the
attachment you are using.
N
Make sure you have a safe and
secure footing.
N
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
NOTICE
Do not stand or kneel on the drive tube.
N
Hold the starter grip with your right
hand.
N
Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way – it might otherwise break.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking.
g
if the engine is cold
e
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
393BA017 KN
8
8
393BA018 KN
9
002BA038 KN
002BA040 KN
002BA072 KN
