Use only high quality parts and accessories. in
order to avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of STIHL original
tools, guide bars, saw chains, chain sprockets
and accessories. They are specifically designed
to match the product and meet your performance
requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
3.1
Clothing and equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear snug-fitting clothing, e.g. an
overall and jacket combination, do not
wear a work coat.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and confine long hair above your should‐
ers.
Wear cut protection safety boots with
non-slip soles and steel toe caps.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g. ear
defenders.
Wear a safety hard hat where there is a danger
of head injuries from falling objects.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL can supply a comprehensive range of per‐
sonal protective equipment.
3.2
Transporting the machine
002BA254 KN
Always stop the engine.
Always fit the chain scabbard – even when you
carry the power tool for short distances.
Ensure that the power tool is always well bal‐
anced and hold it by the shaft for carrying.
Do not touch hot parts of the machine - risk of
burn injury!
By vehicle: When transporting in a vehicle, prop‐
erly secure your machine to prevent turnover,
damage and fuel spillage.
3.3
Before starting
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the KombiEngine and KombiTool
user manuals.
–
Correctly mounted guide bar
–
Correctly tensioned saw chain
–
Never attempt to modify the controls or safety
devices
–
Keep the handles dry and clean – free from oil
and dirt – this is important for safe control of
the machine
–
Adjust carrying harness and handles in
accordance with body height. Observe the
chapter "Fitting the Harness"
To reduce the risk of personal injury, do not
operate your power tool if it is damaged or not
properly assembled!
To prepare for emergencies when using a har‐
ness: Practice setting down the machine quickly.
To avoid damage, do not throw the machine to
the ground when practicing.
See also notes on "Before Starting" in the user
manual of the KombiEngine you are using.
3 Safety Precautions and Working Techniques
English
0458-473-0121-E
3
