Stihl HSE 42, Инструкция по эксплуатации

Страница: 18 / 80

The connector and coupling of the extension
cord must be waterproof or routed in such a way
that they cannot come into contact with water.
Only use cutting blades and accessories that are
explicitly approved for this machine by STIHL or
are technically identical. If you have any ques‐
tions in this respect, consult a STIHL dealer. Use
only high-quality parts and accessories. Other‐
wise there is a risk of accidents and damage to
the unit.
STIHL recommends the use of genuine STIHL
tools and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
Do not spray the power tool with water.
2.1 Clothing and equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and confine long hair above your should‐
ers.
Wear sturdy shoes with non-slip
soles.
2.1.1 Safety Glasses, Hearing Protection
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the protective
glasses are a snug fit.
Wear hearing protection, e.g. earplugs or ear
muffs.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL can supply a comprehensive range of per‐
sonal protective equipment.
2.2 Transporting the Machine
Always switch off the power tool, unplug it from
the power supply and fit the blade scabbard –
even when carrying the unit short distances.
9930BA000 KN
Carry the machine by the handle – with the cut‐
ting blades pointing to the rear.
Transporting by vehicle: Properly secure the
power tool to prevent it tipping over and being
damaged.
2.3 Before starting work
Check that your machine is properly assembled
and in good condition – refer to appropriate
chapters in the instruction manual:
–
Voltage and frequency of the machine (see
rating plate) and the voltage and frequency of
your power supply must be the same.
–
Examine the connecting cord, power plug and
extension cord for damage. Damaged cords,
couplings and plugs or connecting cords that
do not comply with the regulations must not be
used
–
Extension cord sockets must be splash-proof
–
To reduce the risk of stumbling, position and
clearly mark the connecting cable so that it
cannot be damaged or endanger others.
–
The trigger switch lockout, trigger switch and
switch lever must move freely and return to
the idle position when they are released.
–
Cutting blades must be properly tightened and
in safe operating condition (clean, sharp, not
bent or warped), correctly mounted and thor‐
oughly sprayed with STIHL resin solvent (lubri‐
cant).
–
Check cutter guard (if fitted) for damage
English 2 Safety Precautions and Working Techniques
18 0458-762-9621-C