Stihl HL 92 Скачать руководство пользователя

Страница: 2 / 28

Contents

Guide to Using this Manual.........................2

Safety Precautions and Working Techni‐

ques............................................................ 2

Using the Unit............................................. 7

Approved Power Tool Attachments.......... 10

Assembling the Unit.................................. 10

Fuel........................................................... 11

Fueling...................................................... 12

Adjusting the Cutter Bar............................13

Fitting the Harness....................................14

10 Starting / Stopping the Engine.................. 15

11 Operating Instructions...............................17

12 Cleaning the Air Filter............................... 18

13 Engine Management.................................18

14 Adjusting the Carburetor........................... 18

15 Spark Plug................................................ 18

16 Lubricating the Gearbox............................19

17 Sharpening Instructions............................ 20

18 Storing the Machine.................................. 21

19 Inspection and Maintenance by User........21

20 Inspections and Maintenance by Dealer...21

21 Maintenance and Care..............................22

22 Main Parts.................................................24

23 Specifications............................................24

24 Maintenance and Repairs......................... 25

25 Disposal.................................................... 25

26 EC Declaration of Conformity................... 26

Guide to Using this Manual

1.1

Pictograms

The meanings of the pictograms attached to the

machine are explained in this manual.
Depending on the model concerned, the follow‐

ing pictograms may be attached to your

machine.

Fuel tank; fuel mixture of gasoline

and engine oil

Operate manual fuel pump

Filler hole for gear lubricant

1.2

Symbols in text

WARNING

Warning where there is a risk of an accident or

personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the

machine or its individual components.

1.3

Engineering improvements

STIHL's philosophy is to continually improve all

of its products. For this reason we may modify

the design, engineering and appearance of our

products periodically.
Therefore, some changes, modifications and

improvements may not be covered in this man‐

ual.

Safety Precautions and

Working Techniques

Because a long-reach hedge trimmer

is a high-speed, fast-cutting power

tool with very sharp cutting blades

and a long reach, special safety pre‐

cautions must be observed during

operation.
It is important that you read and

understand the User Manual before

commissioning and keep it in a safe

place for future reference. Non-com‐

pliance with the User Manual may

cause serious or even fatal injury.

Observe all applicable local safety regulations,

e.g. by trade organizations, social insurance

institutions, labor safety authorities etc.
If you have never used a power tool before:

Have your dealer or other experienced user

show you how to operate your machine – or

attend a special course to learn how to operate

it.
Minors are not allowed to work with the power

tool – except adolescents above 16 years of age

who are instructed under supervision.
Children, animals and onlookers must not be

allowed near the machine.
When not using the machine, it must be laid

down in such a way that it does not endanger

anyone. Ensure that the machine cannot be

used without authorization.

English

0458-519-8321-D

0458-519-8321-D. VA0.E22.

Printed on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

Original Instruction Manual

0000008168_008_GB

Содержание HL 92





























Результаты поиска

Содержание HL 92

Отзывы:

Похожие инструкции для HL 92

Бренды по названию

Популярные бренды

Stihl HL 92, Инструкция по эксплуатации

Результаты поиска

Содержание HL 92

Отзывы:

Похожие инструкции для HL 92

Бренды по названию

Популярные бренды