Stihl FT 250, Инструкция по эксплуатации

Страница: 10 / 40

FT 250
English
8
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to the machine. If you have
any questions in this respect, consult a
servicing dealer.
STIHL recommends the use of genuine
STIHL replacement parts. They are
specifically designed to match your
model and meet your performance
requirements.
To reduce the risk of injury, always shut
off the engine before carrying out any
maintenance or repairs or cleaning the
machine. – Exception: Carburetor and
idle speed adjustments.
Do not turn the engine over on the
starter with the spark plug boot or spark
plug removed unless the slide control /
stop switch is on STOP or 0 since there
is otherwise a risk of fire from
uncontained sparking.
To reduce the risk of fire, do not service
or store your machine near open flames.
Check the fuel filler cap for leaks at
regular intervals.
Use only a spark plug of the type
approved by STIHL and make sure it is
in good condition – see "Specifications".
Inspect the ignition lead (insulation in
good condition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to
hearing, do not operate your machine if
the muffler is damaged or missing.
Do not touch a hot muffler since burn
injury will result.
Vibration behavior is influenced by the
condition of the AV elements – check the
AV elements at regular intervals.
For safety reasons, the tea plant pruner
may only be operated with the following
cutting attachment:
Circular saw blade 250-100 (scratcher
tooth)
Circular saw blades made of any other
non-metal material are not permitted.
Symbols on Deflectors
Arrows on top of the circular saw blade
(1) and limit stop (2) show the correct
direction of rotation.
Harness
N
Use a shoulder strap.
Shoulder strap with 2 carabiners
(included with machine)
N
Attach the shoulder strap to the
machine.
N
With the engine running, put on the
shoulder strap with the machine.
Shoulder strap with 1 carabiner (special
accessory)
N
With the engine running, attach the
machine to the shoulder strap.
Circular Saw Blade
For cutting shrubs up to a stem diameter
of 6 cm.
Before starting the cut, accelerate the
engine up to full throttle. Perform cut
with uniform pressure.
Use circular saw blade only with a
matching limit stop of the correct
diameter.
002BA226 KN
1 2
262BA049 KN
262BA071 KN