Stihl FSA 65, Инструкция по эксплуатации

Страница: 40 / 408

FSA 65, FSA 85
English
38
Mowing
N
Hold the unit with both hands – one
hand on the control handle – one
hand on the loop handle.
N
Stand upright – hold the power tool
in a relaxed position.
N
Make sure the cutting attachment is
not touching the ground or any other
objects.
N
Swing the trimmer back and forth in
an arc.
N
The cutting height is determined by
the distance of the mowing line from
the lawn surface.
N
Avoid contact with fences, walls,
rocks, etc. since it will result in a
higher rate of wear.
Working with bump guard
The bump guard comes standard with
the FSA 85. It is available as a special
accessory for the FSA 65.
The bump guard (1)
–
Limits the cutting range of the
mowing line
–
reduces the risk of the rotating
mowing line causing damage (e.g.
tree bark)
WARNING
The mowing head may continue to
rotate briefly after you switch off your
power tool – wait for the mowing head to
come to a standstill before adjusting the
bump guard – do not adjust it with your
foot.
Disposal
N
Do not throw cuttings into the
garbage can – they can be
composted.
Cutting attachment
The trimmer comes from the factory with
the AutoCut C 4-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
Using the Unit
3905BA002 KN
1
3905BA003 KN
Approved Combinations of
Cutting Attachment and
Deflector
3905BA004 KN