background image

0458-662-0121-A

5

English 

4 Safety Precautions

3 Brush knife

Cuts brushwood. 

4 Line Limiting Blade

Trims surplus mowing line to correct length.

5 Skirt

Extends universal deflector for use with a mowing head.

6 Transport Guard

Helps protect user from contact with metal cutting 

attachments.

7 Deflector for mowing heads

Protects user from flying debris and contact with the 

mowing head.

8 Mowing Head

The mowing head contains the mowing line.

3.3 Icons

Meanings of icons that may be on the brushcutter, deflector 

and battery:

4.1 Warning Signs

4.1.1 Warning Symbols
Meanings of warning signs on the brushcutter and battery:

1 LED emits red light. The battery is too warm or 

too cold.

4 LEDs flashing red. There is a fault in the 

battery.

Push the release slide forward to switch the 

brushcutter on and set the power levels.

This icon marks the release slide.

This icon shows the direction of rotation of the 

cutting attachment.
This icon shows the maximum diameter of the 

cutting attachment in millimeters.

This icon shows the rated speed of the cutting 

attachment.

Guaranteed sound power level in accordance 

with Directive 2000/14/EC in dB(A) for the 

purpose of comparing the sound emissions of 

products.

The information next to the symbol indicates the 

energy content of the battery according to the cell 

manufacturer’s specification. The energy content 

available in operation is lower.

Do not dispose of the product with domestic waste.

4 Safety Precautions

Observe safety notices and take the necessary 

precautions.

Read, understand and keep the instruction 

manual.

Wear safety glasses.
If objects are likely to fall while working: wear a 

hard hat.

Wear safety boots.

L

WA

Содержание FSA 135





































Отзывы: