manualshive.com logo in svg

Stihl FSA 135, Инструкция по эксплуатации, Страница: 23 / 36

Поделиться
Скачать
Stihl FSA 135 Скачать руководство пользователя страница 23

0458-662-0121-A

21

English 

11 Testing the Trimmer and Battery

► Squeeze and hold the trigger (3) with your index finger.

The brushcutter accelerates and the cutting attachment 

rotates.

The further the trigger (3) is depressed, the faster the 

rotation of the cutting attachment.
At power level 3, the brushcutter identifies the cutting 

attachment used and automatically sets the maximum 

speed.
The LEDs continue flashing for 5 seconds after the trigger 

(3) and trigger lockout (1) are released after switch-on. As 

long as the LEDs flash, the brushcutter can be switched on 

again without having to operate the release slide (2).

10.2 Switching Off

► Release the trigger and lockout lever at the same time.
► Wait for the cutting attachment to come to a standstill.
► If the cutting attachment continues to rotate: Remove the 

battery and contact your STIHL servicing dealer.

The trimmer has a malfunction.

11.1 Checking the controls

Trigger lockout and trigger
► Remove the battery.
► Try pressing the trigger without pressing the trigger 

lockout.

► If you can press the trigger: Stop using your brushcutter 

and contact a STIHL dealer.

The trigger lockout is faulty.

► Press and hold the trigger lockout.
► Squeeze and release the trigger.
► If the trigger or trigger lockout is stiff or does not spring 

back to the idle position: Do not use your brushcutter and 

contact your STIHL dealer for assistance.

The trigger or the trigger lockout is defective.

Switching the Brushcutter on
► Insert battery.
► Press and hold the trigger lockout.
► Push the release slide in the direction of the loop handle 

with your thumb.

► Press and hold the trigger.

The cutting attachment rotates.

► If 3 LEDs on the battery flash red: Remove the battery and 

contact your STIHL dealer for assistance.

The brushcutter has a malfunction.

► Release the trigger.

The cutting attachment stops rotating after a brief delay.

► If the cutting attachment continues to rotate: Remove the 

battery and contact your STIHL dealer.

The brushcutter is defective.

11.2 Testing the Battery

► Press button on battery.

The LEDs glow or flash.

► If the LEDs do not glow or flash: Do not use the battery 

and contact your STIHL servicing dealer.

There is a malfunction in the battery.

12.1 Holding and Controlling the Brushcutter

11 Testing the Trimmer and Battery

12 Operating the Trimmer

1
2

0000-GXX-4780-A0

Содержание FSA 135





































Отзывы:

Нет отзывов