background image

1
2

0000097031-001

► Hook the carrying strip (2) onto the carabi‐

ner (1).

► Wait for brushcutter to stop swinging.

► Check the position of cutting attachment. If it

needs adjustment: Hook the snap hook (1)

into another hole in the hole bar (2) and let it

swing out again.

8

Mixing Fuel and Refueling

the Brushcutter

8.1

Mixing fuel

The fuel required for this trimmer is a mixture of

gasoline and two-stroke engine oil, in a mixing

ratio of 1:50.
STIHL recommends you use STIHL MotoMix.
If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil in accordance with JASO FB, JASO

FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.

► Make sure that the octane number of the gas‐

oline is at least 90 RON and the ethanol con‐

tent is not more than 10% (for Brazil: 27%).

► Make sure the two-stroke engine oil you are

using meets requirements.

► Depending on the desired amount of fuel,

determine the correct amounts of two-stroke

engine oil and gasoline in a mixing ratio of

1:50. Examples for fuel mixes:

20 ml Two-stroke engine oil, 1 l gasoline

60 ml Two-stroke engine oil, 3 l gasoline

100 ml Two-stroke engine oil, 5 l gasoline

► Pour two-stroke engine oil into a clean

approved fuel canister first and then add gaso‐

line.

► Stir the fuel before topping up.

8.2

Fueling the brushcutter

► Shut off the engine.

► Place your brushcutter on a level surface so

that the fuel tank cap faces up.

► Use a damp cloth to clean the fuel tank cap

and the area around it.

0000099186_001

► Turn the tank cap counterclockwise until it can

be removed.

► Remove the fuel tank cap.

NOTICE

■ Exposure to light, direct sunlight and extreme

temperatures may accelerate fuel separation

or aging. The brushcutter can be damaged if it

is used with a fuel mix that has become sepa‐

rated or has aged.

► Thoroughly mix the fuel.

► Do not top up with fuel stored for more than

30 days (STIHL MotoMix: 5 years).

► When topping up, ensure that no fuel is spil‐

led and that the fuel level remains at least

15 mm under the edge of the tank.

0000099187_001

► Fit the fuel tank cap on the tank opening.

► Turn the tank cap clockwise and tighten it

down firmly by hand.

The fuel tank is closed.

9

Starting and Stopping the

Engine

9.1

Starting the engine

► Place the trimmer on a level surface so that

the cutting attachment does not touch the

ground or other objects.

► Remove the transport guard.

English

8 Mixing Fuel and Refueling the Brushcutter

14

0458-844-0101-A

Содержание FS 491 C-M

























Отзывы: