Stihl FS 410 C K, Инструкция по эксплуатации

Страница: 7 / 88

FS 410 C K
English
5
–
Never attempt to modify the controls
or safety devices
–
Keep the handles dry and clean –
free from oil and dirt – this is
important for safe control of the
machine
–
Adjust carrying harness and
handle(s) in accordance with body
height. To this end, observe the
sections "Fitting the harness" and
"Balancing the machine".
The machine should only be used if it is
in good working order – risk of accident!
To prepare for emergencies when using
a harness: Practice setting down the
machine quickly. In order to avoid
damage, when practicing, do not throw
the machine on the ground.
Starting the engine
Move at least 3 m away from the place
at which the machine was refueled –
never in enclosed spaces.
The machine may only be used on level
ground. Ensure a firm and secure
footing and hold the machine firmly. The
cutting attachment must not touch any
objects and must not touch the ground,
because it may begin to rotate when the
machine is started.
This is a one-person machine – ensure
that there is no-one within 15 meters of
the edger, not even when starting the
power tool! Risk of injury due to thrown
objects!
Check engine idling: The cutting
attachment must remain at a standstill
when the engine idles – throttle trigger
released.
Keep easily combustible materials (e.g.,
wood chips, bark, dry grass, fuel) away
from hot exhaust gases and hot muffler
surfaces – risk of fire!
Holding and guiding the machine
Always hold the machine by the handles
using both hands.
Ensure you always have a firm and safe
footing.
Right hand on the control handle, left
hand on the handlebar grip.
During work
Ensure you always have a firm and safe
footing.
In the event of imminent danger or in an
emergency, push the stop button to stop
the engine.
Ensure that there is no-one within a
15 m radius of the machine – risk of
injury by flying objects! This distance
must also be maintained in relation to
objects (vehicles, window panes) – risk
of property damage!
Check for correct idling, so that the
cutting attachment stops turning when
the throttle trigger is released.
Check and/or correct the idle setting
regularly. Have the machine repaired by
a servicing dealer if the cutting
attachment continues to turn
nevertheless. STIHL recommends
STIHL servicing dealers.
Beware of slipping on ice, water, snow
or uneven ground!
Watch out for obstacles: tree stumps,
roots – risk of stumbling!
Only work while standing on the ground,
never on a ladder, work platform or other
unstable surface.
Avoid contact with the
cutting attachment – risk
of injury!
Do not drop-start the
engine – start as
described in the Instruc
-
tion Manual. The blade
runs on for a short while
after releasing the throttle
trigger – coasting effect!
002BA486 KN
15m (50ft)