Stihl FS 40, Инструкция по эксплуатации

Страница: 33 / 96

FS 40, FS 40 C, FS 50, FS 50 C
English
31
N
Use green-coded nylon line with a
diameter of 2.0 mm (0.08 in).
N
Cut two 3 m (9ft 9in) lengths of
nylon line from the reel (special
accessory).
N
Insert the ends of each line (3) in the
holes (4) in the spool.
N
Bend the ends of the lines over the
edge of the holes to form a hook.
N
Straighten out the nylon lines and
wind them tightly on to the spool –
one nylon line in each chamber.
N
Engage the ends of the lines in the
notches (2).
Assembling the mowing head
NOTICE
Check that the spring is installed (see
"Mounting the Mowing Head").
N
Thread the ends of the lines (6)
through the sleeves (7) and push
the spool (2) into the head so that it
snaps into position.
The nylon lines must disengage from the
notches (5) as the spool is pushed into
position.
N
Pull out the ends of the lines as far
as stop.
N
Mount the mowing head on the
machine.
Replacing Cutting Blades
STIHL PolyCut
Always check the mowing head for signs
of wear before installing new cutting
blades.
681BA009 KN
4
3
3
681BA010 KN
5
5
7
681BA011 KN
2
6
6