background image

Control handle: 2.4 m/s².

Left handle: 2.6 m/s².

FS 461 C-M

Sound pressure level L

pA

 measured according

to ISO 22868: 101 dB(A).

Sound power level L

w

 measured according to

ISO 22868: 110 dB(A)

Vibration level a

hv

 measured according to

ISO 22867:

Control handle: 2.3 m/s².

Left handle: 2.4 m/s².

For information on compliance with Employers'

Vibration Directive 2002/44/EC see

www.stihl.com/vib.

19.5

REACH

REACH is an EC regulation and stands for the

Registration, Evaluation, Authorisation and

Restriction of Chemical substances.

For information on compliance with the REACH

regulation see www.stihl.com/reach.

19.6

Exhaust Emissions

The CO

2

value measured in the EU type approval

procedure is specified at www.stihl.com/co2.
The measured CO

2

value was determined on a

representative engine in accordance with a

standardized test procedure under laboratory

conditions and does not represent either an

explicit or implied guarantee of the performance

of a specific engine.
The applicable exhaust emission requirements

are fulfilled by the intended usage and mainte‐

nance described in this instruction manual. The

type approval expires if the engine is modified in

any way.

20 Combinations of Cutting Attachments, Deflectors and Carrying

Systems

20.1

Combinations of Cutting Attachments, Deflectors and Carrying Systems

Cutting attachment

Deflector

Carrying System

AutoCut 46-2 mowing head

DuroCut 40-4 mowing head

PolyCut 48-2 mowing head

(only for FS 361 C-M)

SuperCut 40-2 mowing head

TrimCut C 42-2 mowing head

Deflector for mowing heads

Full harness with

quick release sys‐

tem

Grass cutting blade 230-4

(230 mm dia.)

250-32 Grass cutting blade

(250 mm dia.)

Grass cutting blade 250-40

"Special" (250 mm dia.)

Grass cutting blade 255-8

(255 mm dia.)

Deflector for metal cutting attachments

300-3 brush knife (300 mm

dia.)

Brush knife 305-2 "Special"

(305 mm dia)

Deflector for metal cutting attachments

Shredder blade 270-2 (270

mm dia.)

Guard for shredder blades

225-48 circular saw blade,

scratcher tooth (225 mm dia.)

225-24 circular saw blade,

chisel tooth (225 mm dia.)

HP chisel tooth 225-22 circular

saw blade (225 mm dia.)

225-36 circular saw blade, car‐

bide (225 mm dia.)

Limit stop with diameter 225 mm

Circular saw blade 250-26,

chisel tooth (250 mm dia)

Limit stop with 250 mm diameter

English

20 Combinations of Cutting Attachments, Deflectors and Carrying Systems

22

0458-838-0101-A

Содержание FS 361 C-M





























Отзывы: