background image

Contents

1

Guide to Using this Manual.........................2

2

Safety Precautions and Working Techni‐

ques............................................................ 2

3

Approved Combinations of Cutting Attach‐

ment, Deflector, Limit Stop and Harness.. 12

4

Mounting the Bike Handle.........................13

5

Adjusting the Throttle Cable......................15

6

Mounting the Deflector..............................15

7

Mounting the Cutting Attachment..............16

8

Fuel........................................................... 21

9

Fueling...................................................... 22

10 Fitting the Full Harness............................. 23

11 Balancing the Machine..............................23

12 Starting / Stopping the Engine.................. 24

13 Transporting the Unit................................ 26

14 Operating Instructions...............................28

15 Replacing the Air Filter..............................28

16 Adjusting the Carburetor........................... 28

17 Spark Plug................................................ 29

18 Storing the Machine.................................. 29

19 Sharpening Metal Cutting Blades............. 30

20 Maintaining the Mowing Head...................30

21 Maintenance and Care..............................32

22 Minimize Wear and Avoid Damage...........33

23 Main Parts.................................................34

24 Specifications............................................35

25 Maintenance and Repairs......................... 35

26 Disposal.................................................... 36

27 EC Declaration of Conformity................... 36
Dear Customer,
Thank you for choosing a quality engineered

STIHL product.
It has been built using modern production techni‐

ques and comprehensive quality assurance.

Every effort has been made to ensure your satis‐

faction and trouble-free use of the product.
Please contact your dealer or our sales company

if you have any queries concerning this product.
Your

Dr. Nikolas Stihl

1

Guide to Using this Manual

1.1

Pictograms

The meanings of the pictograms attached to the

machine are explained in this manual.

Depending on the model concerned, the follow‐

ing pictograms may be attached to your

machine.

Fuel tank; fuel mixture of gasoline

and engine oil

Operate decompression valve

Manual fuel pump

Operate manual fuel pump

Tube of grease
Intake air: Summer operation

Intake air: Winter operation

Handle heating

1.2

Symbols in text

WARNING

Warning where there is a risk of an accident or

personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the

machine or its individual components.

1.3

Engineering improvements

STIHL's philosophy is to continually improve all

of its products. For this reason we may modify

the design, engineering and appearance of our

products periodically.
Therefore, some changes, modifications and

improvements may not be covered in this man‐

ual.

2

Safety Precautions and

Working Techniques

Because the machine is a high-speed

fast-cutting power tool, special safety

precautions must be observed to

reduce the risk of personal injury.

English

2

0458-433-0121-B

© ANDREAS STIHL AG & Co. KG 2021

0458-433-0121-B. VA0.H21.

Printed on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

Original Instruction Manual

0000007317_010_GB

Содержание FS 311









































Отзывы: