manualshive.com logo in svg

Stihl FS 311, Инструкция по эксплуатации, Страница: 21 / 40

Поделиться
Скачать
Stihl FS 311 Скачать руководство пользователя страница 21

2

3

1

4

002BA423 KN

b

a

► Place the cutting attachment (1) in position.

WARNING

Collar (a) must locate in the cutting attachment's

mounting hole (b).

Securing the cutting attachment

► Fit the thrust washer (2) – convex side must

face up.

► Fit the rider plate (3).
A rider plate (3) for sawing applications is availa‐

ble as a special accessory. It allows the full

depth of cut of the saw blade to be used.

► Block the shaft.

► Fit the nut (4) counterclockwise and tighten it

down firmly.

WARNING

If the mounting nut has become too loose, fit a

new one.

NOTICE

Remove the tool used to block the shaft.

7.13.1

Removing the cutting attachment

► Block the shaft.

► Unscrew the mounting nut clockwise.

► Pull the cutting attachment with its mounting

hardware off the gearbox.

8

Fuel

Your engine requires a mixture of gasoline and

engine oil.

WARNING

For health reasons, avoid direct skin contact with

gasoline and avoid inhaling gasoline vapor.

8.1

STIHL MotoMix

STIHL recommends the use of STIHL MotoMix.

This ready-to-use fuel mix contains no benzol or

lead, has a high octane rating and ensures that

you always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra two-stroke

engine oil for an extra long engine life.
MotoMix is not available in all markets.

8.2

Mixing Fuel

NOTICE

Unsuitable fuels or lubricants or mix ratios other

than those specified may result in serious dam‐

age to the engine. Poor quality gasoline or

engine oil may damage the engine, sealing rings,

hoses and the fuel tank.

8.2.1

Gasoline

Use only high-quality brand-name gasoline with

a minimum octane rating of 90 – leaded or unlea‐

ded.
Gasoline with an ethanol content of more than

10% can cause running problems in engines with

a manually adjustable carburetor and should not

be used in such engines.
Engines equipped with M-Tronic deliver full

power when run on gasoline with an ethanol con‐

tent of up to 25% (E25).
8.2.2

Engine Oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil in accordance with JASO FB, JASO

FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.

8 Fuel

English

0458-433-0121-B

21

Содержание FS 311









































Отзывы:

Нет отзывов