19.3
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.4
Exhaust Emissions
The CO
2
value measured in the EU type appro‐
val procedure is specified at www.stihl.com/co2
in the product-specific technical data.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardised test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
20.1
Combinations of Cutting Attachments, Deflectors and Carrying Systems
Cutting attachment
Deflector
Carrying system
–
AutoCut C 26-2 mowing head
–
AutoCut 27-2 mowing head
–
AutoCut 36-2 mowing head
–
DuroCut 20-2 mowing head
–
PolyCut 28-2 mowing head
–
SuperCut mowing head 20-2
–
TrimCut 32-2 mowing head
–
Universal deflector
with skirt and line
limiting blade
–
Shoulder strap
–
Full harness with quick-release system
–
Grass cutting blade 230-2
(230 mm dia.)
–
Grass cutting blade 230-4
(230 mm dia.)
–
Grass cutting blade 230-8
(230 mm dia.)
–
Grass cutting blade 260-2
(260 mm dia.)
–
Universal deflector
without skirt
–
Shoulder strap
–
Full harness with quick-release system
–
Brush knife 250-3 (Ø 250 mm)
–
Universal deflector
without skirt
–
Shoulder strap
–
Full harness with quick-release system
–
200-22 circular saw blade,
chisel tooth (200 mm dia.)
–
Chisel tooth circular saw blade
200-22 HP (200 mm dia.)
–
Limit stop
–
Full harness with quick-release system
21 Spare Parts and Accesso‐
ries
21.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1
Disposing of the Brushcutter
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
English
20 Combinations of Cutting Attachments, Deflectors and Carrying Systems
22
0458-507-0121-B