Stihl FS 235, Инструкция по эксплуатации

Страница: 10 / 24

► Carry the trimmer properly balanced by the
drive tube with the cutting attachment
behind you.
4.11 Storing
WARNING
■ Children are not aware of and cannot assess
the dangers of a trimmer and can be seriously
injured.
► Shut off the engine.
► If a metal cutting attachment is mounted: Fit
the transport guard.
► Store the trimmer out of the reach of chil‐
dren.
■ Dampness can corrode the electrical contacts
on the trimmer and metal components. This
can damage the trimmer.
► Store the trimmer in a clean and dry condi‐
tion.
4.12 Cleaning, maintenance and
repair
WARNING
■ The cutting attachment can start rotating unin‐
tentionally if the engine is running during
cleaning, maintenance or repair operations.
This may result in serious injury to people and
damage to property.
► Shut off the engine.
■ The muffler and engine may be hot after a
period of operation. This can result in burn
injuries.
► Wait until the muffler and engine cool down.
■ The gear housing can get hot during opera‐
tion. There is a risk of burn injuries.
► Do not touch a hot gear housing.
■ Aggressive cleaning agents, a water jet or
pointed objects can damage the trimmer,
deflector or the cutting attachment. If the trim‐
mer, deflector and cutting attachment are not
cleaned correctly, components may no longer
function properly or safety devices may be
rendered inoperative. Persons may be seri‐
ously injured.
► Clean the brushcutter, deflector and cutting
attachment as described in this User Man‐
ual.
■ If the brushcutter, deflector or cutting attach‐
ment is not maintained or repaired as descri‐
bed in this User Manual, components may no
longer function properly or safety devices may
be rendered inoperative. This can result in
serious or fatal injuries.
► Maintain or repair the brushcutter and the
deflector as described in this User Manual.
► Maintain the cutting attachment as descri‐
bed in the User Manual supplied with the
cutting attachment being used or on the
cutting attachment’s packaging.
■ The user can be cut by the sharp cutting
edges while cleaning or maintaining cutting
attachments. This may result in injury to the
user.
► Wear work gloves made of robust
material.
5 Preparing Trimmer for
Operation
5.1 Preparing the Brushcutter for
Operation
The following steps must be performed before
commencing work:
► Ensure that the following components are in
safe condition:
–
Brushcutter, 4.6.1.
–
Deflector, 4.6.2.
–
Mowing head or metal cutting attachment,
4.6.3 or 4.6.4.
► Clean the brushcutter, 15.1.
► Fit the carrying ring, 6.1.
► Mount the bike handle, 6.2.
► Select combination of cutting attachment,
deflector and carrying system, 20.
► Mount the deflector, 6.3.1.
► If you are using a universal deflector together
with a mowing head: Fit the skirt and line limit‐
ing blade, 6.4.1.
► Mount mowing head or metal cutting attach‐
ment, 6.5.1 or 6.6.1.
► Fuel the trimmer, 8.2.
► Fit and adjust the carrying system, 7.1.
► Adjust the bike handle, 7.2.
► Balance the brushcutter, 7.3.
► Check the controls, 10.1.
► If you cannot carry out this work: Do not use
your brushcutter and contact your STIHL
dealer for assistance.
6 Assembling the Trimmer
6.1 Fitting the Carrying Ring
► Shut off the engine.
English 5 Preparing Trimmer for Operation
10 0458-507-0121-B