Stihl FC 111, Инструкция по эксплуатации, Страница: 16 / 88

FC 96, FC 111
English
14
Adjust correctly
The depth of cut depends on the
unevenness of the ground, your height
and the way you hold the edger. Use the
following procedure:
N
Adjust the depth wheel (2) so that
the blade (3) just touches the
ground or breaks the surface of the
soil (B) by no more than
5 mm (0.2 in).
N
Tighten down the wingnut
clockwise.
N
Standing in the normal working
position, check the depth of cut
again and correct it if necessary.
WARNING
Do not adjust the deflector.
The deflector has been set at the factory
so that the arrow on the deflector and
the open side point away from the
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
Edging
N
Start the engine
N
Start the cut at no less than half
throttle and continue cutting at full
throttle.
N
Hold and guide your power tool so
that the blade is vertical.
N
Cut steadily so that the engine is not
lugged down – do not apply force.
N
Operate at no more than a normal
walking pace.
N
Do not push the blade into the
ground.
B
2
3
257BA005 KN
257BA006 KN
257BA007 KN
257BA008 KN